发动机改装及升级
经过 OE Match
12 plug distributor, Bosch style. Porsche 911 1972 to 1989
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Rotates clockwise
Fits:
Porsche 911 - 1972 to 1989
Excluding 911 SC 3.0ltr
This distributor is made in the historical design of the original Bosch 3.0 RSR ignition distributor and combines the latest technology with an authentic look.
The ignition map is easily and freely programmable via an app and Bluetooth.
In addition, an immobilizer can be locked/unlocked with a PIN and a speed limiter can also be set easily via a smartphone.
This version requires two 3-pin HKZ devices but it fits all engines from 1972 to 1989, so from the 2.4ltr to the 3.2 Carrera
This ignition distributor rotates clockwise, so for all engines except 911 SC 3.0ltr
安全购物
12 个月保修
全球交付
.jpg?width=197&height=148 "12 plug distributor, Magneti Marelli style. Porsche 911 1965 to 1971")
12 plug distributor, Magneti Marelli style. Porsche 911 1965 to 1971
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Fits:
Porsche 911 2.0ltr - 1965 to 1969
Porsche 911 2.2ltr - 1970 to 1971
This distributor is made in the historical design of the original Magneti Marelli ignition distributor and combines the latest technology with an authentic look.
It was installed at the factory on the 906, 911R, 914/6 GT and 911 ST and the ignition map is easily and freely programmable via an app and Bluetooth.
In addition, an immobilizer can be locked/unlocked with a PIN and a speed limiter can also be set easily via a smartphone.
This version requires two 3-pin HKZ devices but it fits all engines from 1965 to 1971, so from the 2.0ltr to the 2.2ltr
安全购物
12 个月保修
全球交付
12 plug distributor, Magneti Marelli style. Porsche 911 1972 to 1989
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Clockwise rotation
Fits:
Porsche 911 - 1972 to 1989
Excluding 911 SC 3.0ltr
This distributor is made in the historical design of the original Magneti Marelli 2.8/3.0 RSR ignition distributor and combines the latest technology with an authentic look.
It was installed at the factory on the 911 ST 2.5ltr and on the 2.8ltr 911 RSR and the ignition map is easily and freely programmable via an app and Bluetooth.
In addition, an immobilizer can be locked/unlocked with a PIN and a speed limiter can also be set easily via a smartphone.
This version requires two 3-pin HKZ devices but it fits all engines from 1972 to 1989, so from the 2.4ltr to the 3.2 Carrera
This ignition distributor rotates clockwise, so for all engines except 911 SC 3.0ltr
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
90160202500
您正在查看的产品与这些编号存在交叉引用关系
安全购物
12 个月保修
全球交付
Lightened crankshaft for steel con rods. Porsche 911 2.0ltr / 2.2ltr
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Fits:
Porsche 911 2.0ltr - 1965 to 1969
Porsche 911 2.2ltr - 1970 to 1971
Notes
Conforms to FIA Appendix K
Tested to 10,000 RPM
Increasing the performance of an engine via the crankshaft does not make sense at first glance, but it is worth taking a closer look.
The mechanical efficiency of an engine, which, together with the thermodynamic efficiency and the volumetric efficiency, determines the rated output of an engine, depends fundamentally on the diameter of the crankshaft bearings and the friction in the bearings.
Of course, the diameter cannot be easily changed, but the friction can, which in turn depends on the bending loads and the resulting vibrations of the crankshaft. This is exactly why the use of top-quality titanium connecting rods is of little use if the resulting significantly reduced rotating masses at the connecting rod foot are not also taken into account on the counterweight side of the crankshaft.
Because only a perfectly designed crankshaft, calculated for the connecting rod weights, actually brings with it less bearing friction due to eliminated vibrations, and thus an increase in performance. Furthermore, this crankshaft is speed-resistant up to 11,000 rpm and tested in continuous operation up to 10,000 rpm. A pleasant side effect is of course a reduced load on the crankcase and less wear.
This crankshaft is designed utilising the latest calculation methods using CAD and FE methods (finite elements), but is still FIA legal for historic motorsport and conforms to Annex K, but is only designed for operation with steel connecting rods. The focus was on the FIA regulation that " in the case of a new production, the original or the newly manufactured component may be lightened, which was exactly the case with this crankshaft.
If you want to run this crankshaft with titanium connecting rods, use crankshaft part number 91610201600/1 which is designed for the lower rotating masses of titanium connecting rods. Failure to comply with the mass balance will sooner or later lead to the crankshaft breaking at maximum speeds.
Furthermore, this crankshaft is an authentic replacement for every standard crankshaft of the 911 from 1965 to 1971, i.e. every 2.0ltr and 2.2ltr engine.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
90110201101
您正在查看的产品与这些编号存在交叉引用关系
安全购物
12 个月保修
全球交付
Lightened crankshaft for titanium con rods. Porsche 911 2.0ltr / 2.2ltr
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Fits:
Porsche 911 2.0ltr - 1965 to 1969
Porsche 911 2.2ltr - 1970 to 1971
Notes
Tested to 10,000 RPM
Increasing the performance of an engine via the crankshaft does not make sense at first glance, but it is worth taking a closer look.
The mechanical efficiency of an engine, which, together with the thermodynamic efficiency and the volumetric efficiency, determines the rated output of an engine, depends fundamentally on the diameter of the crankshaft bearings and the friction in the bearings.
Of course, the diameter cannot be easily changed, but the friction can, which in turn depends on the bending loads and the resulting vibrations of the crankshaft. This is exactly why the use of top-quality titanium connecting rods is of little use if the resulting significantly reduced rotating masses at the connecting rod foot are not also taken into account on the counterweight side of the crankshaft.
Because only a perfectly designed crankshaft, calculated for the connecting rod weights, actually brings with it less bearing friction due to eliminated vibrations, and thus an increase in performance. Furthermore, this crankshaft is speed-resistant up to 11,000 rpm and tested in continuous operation up to 10,000 rpm. A pleasant side effect is of course a reduced load on the crankcase and less wear.
This crankshaft is designed utilising the latest calculation methods using CAD and FE methods (finite elements) and is designed for operation with titanium connecting rods only.
If you want to run this crankshaft with steel connecting rods, use crankshaft part number 90110201100/1. Failure to comply with the mass balance will sooner or later lead to the crankshaft breaking at maximum speeds.
Furthermore, this crankshaft is an authentic replacement for every standard crankshaft of the 911 from 1965 to 1971, i.e. every 2.0ltr and 2.2ltr engine.
You can easily swap out any 2.0ltr or 2.2ltr 911T crankshaft that doesn't have factory counterweights for this crankshaft with counterweights.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
91610201600
您正在查看的产品与这些编号存在交叉引用关系
安全购物
12 个月保修
全球交付
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
