Pedals / Floor Boards / Track Mats LHD Cars
By OE Match
Balance beam brake pedal assembly LHD. Porsche 911 1965 to 1977
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 914 (1970-1976)
Fits:
Porsche 911 - 1965 to 1977
Porsche 911 - 1978 to 1989 if brake booster (servo) is deleted
Porsche 914 - 1970 to 1976
Note - No bodywork adjustments to the footwell are required to fit the pedal assembly.
We have re-issued this motorsport inspired accessory that has not been available for many years
Left Hand Drive (LHD) only
As fitted to the 911 SC RS by the Porsche factory, a balance beam brake system works by allowing precise distribution of the braking forces between the front and rear axles by adjusting the brake beam. This allows the maximum braking performance for the vehicle.
If using upgraded (from standard) brake calipers with different piston sizes, different pads or larger brake discs the braking force to the respective axles can be altered so a balance beam brake system should be used. Brake calipers with increased piston sizes can also lead to a "soft" brake pedal and the balance beam brake system prevents this.
The balance beam systems has two brake master cylinders mounted in parallel on a bracket that allows precise adjustment between the front and rear axles.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91142305401
The product you are viewing cross references to these numbers
Shop Securely
12 Month Warranty
Worldwide Delivery
.jpg?width=197&height=148 "Balance beam brake pedal assembly RSR style LHD. Porsche 911 / 914")
Balance beam brake pedal assembly RSR style LHD. Porsche 911 / 914
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 914 (1970-1976)
Fits:
Porsche 911 - 1965 to 1977
Porsche 911 - 1978 to 1989 if brake booster (servo) is deleted
Porsche 914 - 1970 to 1976
We have re-issued this motorsport inspired accessory that has not been available for many years
Left Hand Drive (LHD) only
Note: The floor pan must be modified and included in the kit is the reinforcement panel required.
As fitted to the 2.8 RSR and 3.0 RSR by the Porsche factory, a balance beam brake system works by allowing precise distribution of the braking forces between the front and rear axles by adjusting the brake beam. This allows the maximum braking performance for the vehicle.
If using upgraded (from standard) brake calipers with different piston sizes, different pads or larger brake discs the braking force to the respective axles can be altered so a balance beam brake system should be used. Brake calipers with increased piston sizes can also lead to a "soft" brake pedal and the balance beam brake system prevents this.
The balance beam systems has two brake master cylinders mounted in parallel on a bracket that allows precise adjustment between the front and rear axles.
If you don't want to make any changes to the bodywork, or originality is not so important to you, use the balance arm brake system of the 911 SC RS (item number 91142305401/1).
Shop Securely
12 Month Warranty
Worldwide Delivery
.jpg?width=197&height=148 "Balance beam brake pedal installation kit. Porsche 911 / 914 - 1,07300C, 91142305401, 91142305411")
Balance beam brake pedal installation kit. Porsche 911 / 914
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 914 (1970-1976)
- Porsche 912E 4CYL 1976
Fits:
Porsche 911 - 1965 to 1977
Porsche 911 - 1978 to 1989 if brake booster (servo) is deleted
Porsche 914 - 1970 to 1976
With brake beam brake pedal installation
The set contains the additional parts that are required for installing the balance beam brake system in the vehicle.
Kit Contains:
Brake fluid reservoirs with clamps x 2
Connecting hoses between the reservoir and master brake cylinder with suitable clamps
Connections on the master brake cylinder on the inlet side,
Adapter to M10x1 thread for the brake light switch
Pressure-switching brake light switch
Distribution piece for the front brake circuit (if necessary, the switch can be installed at this point)
Copper sealing rings x 4
With the standard pedals, the brake light switch is actuated mechanically by the brake pedal, which is no longer possible with the balance arm brake system.
This necessitates hydraulic actuation, which is easily integrated into the brake line using a connector and a pressure-triggering brake light switch.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91135501313
The product you are viewing cross references to these numbers
Shop Securely
12 Month Warranty
Worldwide Delivery
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}